The Fico Molding range of automatic and manual molding systems have a proven reputation for innovation, quality, reliability and high volume output.

FICO Molding
Sorry, your browser does not support inline SVG.

Besi's Fico AMS Series
Besi logo
slide 1
slide 2
slide 3
slide 4
slide 5
The Fico molding range of automatic and manual molding systems have a proven reputation for innovation, quality, reliability and high volume output. Based on experience, dating back several decades, each system has been designed to meet the challenges of today’s ever more demanding manufacturing processes. Driving forces as cost, performance and form factor are pushing molding into a new type of packages and interconnections such as Flip Chip, Exposed Die, Stacked Die and System In Package, with carriers as BGA and QFN. For all these new specific applications Besi Netherlands offers the best solution and equipment for your requirements. Fico molding systems significantly increase yields whilst keeping cost of ownership low. On top of this, our process knowledge and process support assists you in improving your current processes and help you with the introduction of new packages. The Fico Process Technology and Engineering department are ready to assist you in the design of your final package, in optimizing your process parameters, process reliability, process costs and selection the most suitable molding solution for your applications Automatic and ManualBesides automatic machines for high volume production, manual machines are available that can run production with the same molds. The manual machine is especially developed for offline cleaning and molding process parameter optimization. By making use of the original molds, new products can be developed and optimized prior to large scale production.
The Fico AMS-W is the most economic and flexible MAP molding system, dedicated to the latest trend in single sided packaging. It is the molding solution for products like QFN, BGA, BOC and BGA-MAP, including high end applications such as flip chip, multi-chip array and stacked die.
  • Clean room class 1000
  • Top edge gating
  • 45 tons press station
  • Transfer pressure control
  • Cavity vacuum control
  • Adaptive clamping
  • Semi S2/S8 compliant
  • Unwanted object detection in the press to prevent damage
  • Remaining cull detection when molded products are unloaded
  • Leadframe orientation check with automatic correction
  • Remote pellet feed with pellet length check
  • Product & lot tracking
  • Large cull bin, can be emptied while the machine continues production
  • User friendly touch screen with all machine manuals
  • Clean room class 1000 compatible
  • CE compliant
The Fico AMS-W for top foil is an automatic molding system for single sided MAP products like BGA, QFN and BOC. The unique top foil feature on this machine allows bleed free production of bare die products. A special foil, guided over the top mold creates a soft sealing layer between mold and products. As a result, the die stays clear of compound. The use of top foil eliminates an extra cleaning process step after molding.
  • Top edge molding
  • 45 tons press station
  • Cavity vacuum control
  • Board vacuum
  • Dynamic clamping control
  • Transfer pressure control
  • Dynamic temperature control
  • Easy mold exchange
  • Compound reduction
  • Small footprint (up to 50% smaller)
In line with the market trend of larger substrates, Fico has introduced a new large substrate molding machine. The Fico AMS-LM can handle substrates of up to 102 x 280 mm and can handle all current single sided packages.Large substrates allow a high board utilisation and in combination with the high output of the Fico AMS-LM, performance and yield increase significantly.
  • Cassette Handler
  • High capacity
  • Freely accessible
  • Slot to slot copy
  • Two or four deck version
  • Bar code and RFID reader (optional)Vision
  • Leadframe orientation check
  • Mark inspection
  • Optical Character Verification (OCV)Leadframe Handler
  • Automatic orientation correction
  • Leadframe pre-heating
  • Anti warpage leadframe cooling
  • Air cushion transportMolding Press
  • Large substrate molding
  • Topedge molding (low viscosity compounds)
  • Adjustable high clamping force
  • Dynamic Clamping Control (Flip Chip Bare Die)
  • 17 process patents
  • Board and cavity vacuum
  • Individual, equal board clampingPellet Supply
  • Remote pellet feed (up to 40m)
  • Pellet length check
  • Pellet cooling
  • Pellet age control
In line with the market trend of larger substrates, Besi Netherlands has introduced a new large substrate molding machine with Top Foil functionality, to mold single sided MAP products like BGA, QFN and BOC. The unique Top Foil feature on this machine allows bleed free production of bare die products.Top FoilA special foil, guided over the top mold, creates a soft sealing layer between mold and products. As a result, the die stays clear of compound. The use of top foil eliminates an extra cleaning process step after molding. The Fico AMS-LM Top Foil can handle substrates of up to 102 x 280 mm and can handle all current single sided packages.
  • Cassette Handler
  • High capacity
  • Freely accessible
  • Slot to slot copy
  • Two or four deck version
  • Bar code and RFID reader (optional)Vision
  • Leadframe orientation check
  • Mark inspection
  • Optical Character Verification (OCV)Leadframe Handler
  • Automatic orientation correction
  • Leadframe pre-heating
  • Anti warpage leadframe cooling
  • Air cushion transportMolding Press
  • Large substrate molding
  • Top Foil
  • Top edge molding (low viscosity compounds)
  • Adjustable high clamping force
  • Dynamic Clamping Control (Flip Chip Bare Die)
  • 17 process patents
  • Board and cavity vacuum
  • Individual, equal board clampingPellet Supply
  • Remote pellet feed (up to 40m)
  • Pellet length check
  • Pellet cooling
  • Pellet age control
The Fico MMS-LM is a molding system for single sided products in MAP, such as BGA, QFN etc. The machine was especially developed for molding process parameter optimization. By making use of the original molds, new products can be developed and optimized prior to large scale production. Besides that, the Fico MMS-LM can be used for small production batches or offline cleaning of the molds that are used in the Fico AMS-LM.CompatibleThe user friendliness of the Fico MMS-LM creates the opportunity to quickly introduce new products by making use of test molds. As on the automatic version, the Fico MMS-LM can be used with V-pin molds. Especially in combination with high vacuum, V-pins allow full control of the cavity vacuum.
  • Top edge molding
  • 45 ton press station
  • Cavity vacuum control
  • Board vacuum
  • Adaptive clamping
  • Transfer pressure control
  • Dynamic clamping control
The Fico MMS-LM for top foil is the manual version of the AMS-LM, automatic molding system. It can be used for single sided products in MAP, such as BGA or QFN. Top foil allows bleed free production of bare die products.A special foil, guided over the top mold, creates a soft sealing layer between the top mold and the products which eliminates an extra cleaning process step after molding.
  • Top edge molding
  • 45 tons press station
  • Cavity vacuum control
  • Board vacuum
  • Dynamic clamping control
  • Transfer pressure control
  • Dynamic climate control
  • Easy mold exchange
  • Built in vacuum cleaning
  • Completely compatible with the AMS-LM
The Fico AMS-i is a fully automatic molding system. It is designed for all current and future package types, using any type of pelletized molding compound. Independent, flexible press operation, high reliability and the shortest machine time in the market, guarantee high output. The flexible design allows easy incorporation of your specific requirements.Intelligent mold identification, which automatically loads process parameters, ensures quick start-up and ease of operation.
  • Product lot tracking
  • Leadframe orientation check
  • Remote pellet feed with pellet length check
  • Presses with 90 tons clamp force
  • Capability for clear compound
  • Unwanted object detection in the press to prevent damage
  • Remaining cull detection when molded products are unloaded
  • Large cull bin, can be emptied while the machine continues production
  • Flexmode operation (cleaning while production continues)
  • Clean room class 1000
  • Machine is CE compliant
  • User friendly touch screen
  • Machine manuals available on the user interface
The Fico MMS-i is a single press, manual version of the Fico AMS-i automatic molding system. It was especially developed for molding process parameter optimization. By making use of test molds, new products can be developed and optimized prior to large scale production. Besides that, the Fico MMS-i can be used for small production batches or offline cleaning of the molds that are used in the Fico AMS-i.User friendlyThe user friendliness of the Fico MMS-i creates the opportunity to quickly introduce new products by making use of test molds. As on the automatic version, several optional systems can be used on the Fico MMS-i, to even enhance the field of use.
  • 90 ton press station
  • Cavity vacuum
  • Hand vacuum cleaner
  • Automatic tool ID
  • Multi voltage input transformer
  • Ergonomic design
*Name

*Company

*Country

*Your e-mail

*Phone number

*Your enquiry



* Required
Please complete and submit the form with you name, contact details and a brief description of your enquiry.

We are always pleased to hear from you.

A member of the Accelonix team will respond back to you as soon as possible