DS Series

Standalone systems are configured with a flat worktable and board crowders that hold the product to a registered location. For additional support the worktable may have vacuum ports or support custom fixturing. Inline configurations are standard with 3 stations, Entrance, Work area and Exit. Each of the stations is configured with a board stop and product present sensors to track the product through the system. Heat is configurable to the DS Series in the worktable for standalone systems or all three zones of a conveyor in the inline configuration.

Pumps may also have heat applied for fluid that perform better under an elevated temperature environment. Construction of the DS Series system is based on a welded steel frame that has been carefully manufactured for high accuracy manufacturing. During assembly the system is subjected to a number of alignments and setups to ensure the highest level of precision. After manufacturing the systems will undergo the contour mapping process for the final touches on positioning capability. All DS Series models are well suited for multi-functional applications combining dispensing with light assembly / pick & place applications.

• Inline and Stand-alone Models
• Up to 3 Pump/Tool Mount Stations
• Automatic Vision Alignment System (GPD Cyclops system) and Pattern Recognition Trainer
• Easy Programming of dots, lines, fills, arcs, etc. through GPD Global FLOware Operating Software
• Real-Time Editor while system is in production
• Interlocked Safety Barriers for Operator Safety
• Auto Calibration Station for automatic X,Y,Z needle calibration

• Positioning Accuracy ± 0.0015" (± 0,0381 mm)
• Repeatability ± 0.0006" (± 0,0152 mm)
• Dispense Rate 28,000 dots/hour
• Linear Speed up to 20 inches/second (508 mm/second)
• 2 Work Area Sizes: DS9000: 18" x 18" & DS9100: 24" x 24"
• X-Y-Z Brushless Servo Motors with Precision Ball Screws
• Inline model is SMEMA compatible